AKAI AM-2600 je zosilňovač známej japonskej značky AKAI. Je to typický zástupca 70-tych rokov. Tvoril zostavu s tunerom AT-2600. Bol to najvyšší model výrobcu. nižšie bol typ AM-2400, resp. AM-2200
Výroba: 1976-1979
Cena:
TECHNICAL DATA
POWER AMPLIFIER SECTION
Continuous Power Output (Both Channels Driven):
2 x 65 watts RMS, at 4 ohms from 20 to 20,000 Hz with no more than 0,1 % THD.
2 x 60 watts RMS, at 8 ohms from 20 to 20,000 Hz with no more than 0,1 % THD.
2 x 95 watts into 4 ohms at 1 kHz, with no more than 0,5% THD .
2 x 72 watts into 8 ohms at 1 kHz, with no more than 0,5% THD.
Power Bandwidth (IHF): 7 Hz to 50 kHz/8 ohms
(Total Harmonic Distortion: 0,1%)
Signal-to-Norse Ratio (IHF)
PHONO: Better than 75 dB
TAPE/AUX: Better than 95 dB
Residual Noise: Less than 0.8 mV at 8 ohms
Channel Separation (IHF)
PHONO: Better than 55 dB at 1,000 Hz
Damping Factor: More than 60 ( 1 kHz, 8 ohms)
Output:
Speakers: A, B (4 to 16 ohms) /A+ B (8 to 16 ohms)
Headphone: 4 to 16 ohms
PREAMPLIFIER SECTION
Input Sensitivity/ Impedance
PHONO: 3 mV /50 K ohms,
PHONO 2: 3 mV /33 K ohms, 50 K ohms, 100 K ohms
AUX: 150 mV / 100 K ohms,
TUNER: 150 mV / 100 K ohms
TAPE MONITOR:
PIN: 150 mV / 100 K ohms,
DIN: 150mV/ 100 Kohms
Output Level /Impedance
TAPE REC:
PIN: 150 mV / 1 K ohms,
DIN 30 mV / 150 K ohms
Frequency Response
PHONO (RIAA equalization): 30 Hz to 15 kHz (+- 0,8 dB)
Tuner, AUX, Tape: 7 Hz to 70 kHz (+0 dB / - 1 dB)
Tone Control
BASS: ±9 dB at 100 Hz
TREBLE: ± 9 dB at 10 kHz
Loudness Control: + 10 dB at 100Hz, + 6 dB at 10 kHz (Volume control set at - 30 dB position)
Filters
HIGH:
- 5 dB at 7 kHz
- 3 dB at 10 kHz
LOW:
- 2 dB at 30 Hz
- 6 dB at 50 kHz
MISCELLANEOUS
Semiconductors: Transistors: 35, Diodes: 17
Power Requirements:
CSA UL and LA models: 120V, 60 Hz
CEE models: 220V, 50 Hz
Other models: 110/ 220 /240Vswitchable, 50-60 Hz.
Dimensions: 440 (W) x 141 (H) x 331 (D) mm
Weight: 10 Kg
